V33 Renovation Cotton Satinwood Cupboard & Cabinet Paint, 2L

• For use on Cabinet & cupboards
• Surface Preparation – Preparation of the surface is essential. Wash the surface with a soda-based or sugar soap (alkaline) cleaner. On laminate and varnished or painted wood in good condition: wash, rinse and allow to dry. Sand (240 grit) and remove dust. On oak and bare chestnut: apply a suitable undercoat to block the tannins. On bare tiled floor: wash, including grouting, rinse and allow to dry. On tiled floor already painted in good condition: wash, rinse thoroughly and allow to dry. Sand (240 grit) and remove dust. On tiled floor already painted or partially worn: Sand with sandpaper (60 then 120 grit) to return to the original surface. Remove dust, wash, rinse and allow to dry.
• Instructions for Use – Apply the paint at room temperature between 12 and 25°C and avoid draughts. 1. Stir the paint with a stirrer or wide stick, working around the bottom of the tin to mix it well. 2. Start by painting the angles, moldings and joints of the surface. Work on small surfaces. Apply from one end to the other. Follow with successive cross strokes. Do not start 2nd coat while it’s still drying. Leave to dry for 6h (do not exceed 12h) and apply a 2nd coat in the same way. On horizontal surfaces (worktop for instance), the paint has to be covered with the Renovation Worktop Protection.
• Guarantee – Statutory

Features and benefits

• 2-in-1 paint which requires no undercoat or need to strip back to bare wood
• Formulated with Teflon™ stain resistance technology
• High Resistance to adhesion and scratches
• Ultra Washable with high wet scrub resistance, making painted surfaces easy to maintain